Shower Plug 1L | Shower waterproofing that lasts 10 years
October 14, 2015
slip grip 20L
Slip Grip 20L
February 1, 2016
Show all

Shower Plug 220mL | Shower waterproofing that lasts 10 years


Waterproof your shower with 30 minutes of DIY work using just a brush, a cloth and a 220mL can of Shower Plug. Shower Plug fixes and prevents leaks in showers, balconies and all masonry surfaces by penetrating into the masonry surface and forming a water-repellent barrier. Lasts 10 years.

Coverage: 75ft​²​.

Shower Plug gives ​you the solution.

SKU: SP220ML Category:

Advantages of Shower Plug

Released in 1992, Shower Plug is premium-grade penetrating sealer technology for leaking shower repair. Shower Plug provides cost and time efficiency, longevity and reliability through chemistry.

Fixing a leaking shower, methods compared:

Tile and membrane removal and replacement Shower Plug 220mL
Cost (time) >3 days 30 minute application, ready to use in 12 hours
Skill level required Trade DIY
Effective lifespan 5 years on average 10 years minimum (warranty)
  • Shower Plug prevents mold
  • Shower Plug makes surfaces easier to clean and reduces the amount of detergents needed
  • It does not change surface appearance or make the surface slippery
  • Effective indoors and outdoors. Shower Plug is friction, weather and UV-resistant
  • Shower Plug will seal hairline cracks/gaps. For larger cracks, patch up with grout or silicone
  • Surface will remain breathable, allowing trapped water to escape from below the tiles and dry out
  • For use on new and existing showers and balconies
  • Safer than household paint.

Australian-designed, made and owned for professional quality in shower waterproofing.

How-To: Bathroom Waterproofing

Shower Plug’s advanced chemistry not only provides long-term results, but it also does the hard work for you.

Using a natural bristle brush, apply two coats of Shower Plug, five minutes apart, and then wipe away the remaining excess five minutes after the second coat.

Job done, without removing tiles.

Application Notes for Shower Plug

Shower Plug’s formulation is high quality and therefore very safe to use. Nevertheless, it is always advisable to use protective gear and ventilation when applying the product.

Shower Plug does not change the surface texture or appearance. Remember to wipe the final coat off within five minutes. If Shower Plug is left to dry out on the surface, a white residue will remain. Remove this with turpentine.

Shower Plug will give off a solvent-type odor as it is is applied and as it cures. This odor will fade by the end of the curing process.

Shower Plug does not affect clothing.

Shower Plug is suitable for use on:

  • Grout
  • Tiles, including: ceramic, porcelain, marble, glazed or unglazed, terrazzo, slate, terracotta, and others.
  • Concrete
  • Terracotta
  • Stone
  • Bare plaster (in order to later paint over plaster treated with Shower Plug, a solvent primer undercoat is required).

Unsuitable surfaces include:

  • Plastics/polymers; polyurethane, polycarbonate, etc.
  • Glass
  • Metal
  • Wood
  • Painted surfaces.

Shower Plug binds to all masonry and only masonry.

Purchase the Shower Plug Kit now to begin your waterproofing project.


Additional information
Weight 0.51 kg
Dimensions 2.95 × 2.95 × 3.15 cm